Stains – Getting Started & Next Steps

Tips on How to Do Deck Staining Decks that are not cleaned and stain applied to them usually last for a lesser period that they are supposed to. The deck will be easily destroyed by the water from the rain, or even few drops poured into it. A good deck will be able to repel water therefore not affecting it negatively. If you find that it is not able to do so, you should reconsider staining it. There are a lot of stains which are either solid, semi-transparent or clear stains that are available in the market. If your deck is looking old, applying stains will not only make it more appealing but will also increase the number of years that it can be used. The stain also acts as a filler to those decks which have cracks. The tips below will guide you when you want to apply stain on your deck. It is important that you do staining in the warm season. Choose the season when it is not very hot or freezing. If the weather is for example scorching, the stains will dry very first leaving the stain not well absorbed in the wood. It is also not good to do the staining during the wet season because it takes longer to dry. This will affect your working negatively. It is recommended that you stain the deck when the temperatures are between 50F to 90F. Make sure that thorough preparation on the deck is carried out before staining. Remove all possible dirt and dust by cleaning the surface properly. Sanding the surface, especially in the splintered areas, is important. Eliminate the dirt between the boards using a knife. Do not use the pressure cleaner if you don’t want to wait for many days for it to dry.
Practical and Helpful Tips: Stains
The stain type that you use should match the woods. Each stain type has its own different benefits. Do not use a different stain from the one that you had used earlier on your deck. You will not be able to use the clear and the semi transparent stain if you had earlier used a solid one. It is different because you can use the solid stain if you had earlier used the clear one.
Why not learn more about Stains?
The coating of the stain should also be thin. If the gallons that you want to use are many, you should first mix them well until you get a consistent color. Then use light stains that will be able to avoid pool formation which is hard to soak in the wood. When applying the semi transparent or the clear stain, make it thinner.